Contact Us

Tile refinishing is the process by which an experienced bathtub and tile refinisher (preferably trained by Tubklass/cogent) brings new life to by properly preparing and Appling specialized Cogent Coatings formulations and chemicals

These chemicals are specifically designed to bond permanently to bathtubs tiles and fiberglass/acrylic surrounds. With proper training and experience you can offer your customers a viable alternative to a full gutting of the bathroom

Cogent Coatings will provide you with what is expected from the customer. Such as smooth HI gloss durable sanitary easily cleanable surface.

When you provide service with the cogent coatings product line you can rest assured that you have a happy customer. And a good reputation

Preparing tile with cogent coatings tub and tile acidic cleaner is a breeze. Just fill a qt cup with 8 oz of cleaner to 24 ounces of water. And you ready to clean and etch your tile substrate. In about 3 minutes you’re tile will be ready to go

A good wipe down with acetone is always recommended to ensure that all of the surface is dry

Masking is a crucial part of the refinishing process. If you don’t take your time with this step you can be sure to have a frowning customer

Next you are ready to apply our panted Glo Ck bonding agent just wipe the surface with acetone and then spray two coats of this powerful yet easy to use bonding agent. Once done it is strongly recommended that you check the coverage with our Glow Ck light this will ensure proper coverage and eliminate callbacks due to adhesion.

Now the final step mix the coatings to the recommended ratios and spray 3-4 coats you will notice the super-fast tack time and the super glossiness of this engineered coating. This coating was developed with re-finishers in mind we know time is money so we incorporated a fast dry time so that you can tear down and caulk in just 5 minutes you can even use a wet sponge on the caulk line to clean it up. How’s that for fast…

Hard to believe try it for yourself contact us and get some to try for yourself…

Bathtub Refinishing also known as Bathtub Painting, Bathtub Reglazing, Bathtub Resurfacing, is a process where a professional skilled coating applicator services a bathtub to give it an extended life without having to replace it, with a new tub.

This Bathtub Reglazing Process generally takes 2-4 hours to complete. Although it is a generally simple process. Much care should be taken if the Bathtub refinish process is to be handled by a non Pro. It must be understood that Quality Materials can only be truly obtained by seasoned certified Bathtub resurfacing Pro. Such as the ones Certified by Tub Klass.com These Cogent Coatings Bathtub Reglazers will have a thorough understanding of the Bathtub Refinishing Process from start to finish. You can find many D.I.Y. Bathtub Refinishing kits at your local Big Box Home Centers. But please consider that the Bathtub paint you can get at such locations are meant for the general public.

These type of Bathtub paint is not design to give a long life to the application. It is developed so that the general consumer (AKA) (John Q Public) can use not all of the DIY BTRK Products that are necessary are included with such BTR Kits Therefore it is advised that you seek out an experienced Bathtub Refinisher that will give your bathtub the correct reglazing treatment that will provide you with a long lasting and durable reglazed finish such as the ones —– at Cogent Coatings.

In addition, Bathtub Reglazing should be done with proper HLVP type of equipment H.V.L.P stands for (Hi Volume Low Pressure). This is ideal for the situation that you find yourself in situation that you find yourself in. When refinishing a bathtub. It creates less over spray bathtub such as fine finish to the bathtub such as the ones needed for a properly refinished bathtub. DIY BTR Kits that require you to use a paintbrush or a roller should be avoided. They are just a waste of money and you will just have to call a Pro and pay extra so that he can remove the coatings you just applied and refinish your Bathtub properly.

 

Brief Overview of How to Refinish a Bathtub:

1. 1. Set up fume exhauster (1st on, last off)
   2. Cover the bathroom floor with a drop cloth or builder’s paper.
   3. Remove caulking from around the tub and in the corners with a razorblade or a 5in 1 tool. If silicone caulk has been used, you will need to wipe the area with alcohol after removing the caulk. This will remove the film that was left by the silicone caulk.
   4. Remove overflow when possible. If not then mask. If removed place overflow between sink and toilet.
   5. Scrape the tub with a razor blade to remove any debris stuck to the surface.
   6. Wash the tub with TUB KLASS ACID TUB WASH. Rinse well with warm water.
   7. Dry tub with paper towels or a heat gun.
   8. Wash tub with acetone. Wipe with paper towel.
   9. Repair chips with putty.
   10. Mask the tub using a hand masker. Start on the right hand corner closest to you and continue around tub to other end. This will make it easier to remove. Use 1-in. tape to hold top of paper in place. Small pieces 1½-inches long will do the trick.
   11. Place a baggie on the tub spout and shower head.
   12. Mask the drain and trim with razor blade.
   13. Mask the faucet.
   14. The putty should be dry by now. If not use a heat gun to speed it up. Sand with 80 grit paper.
   15. Wipe out tub with acetone.
   16. Finish masking by covering everything that you don’t want to buy. Counter, toilet, all towel bars, and soap dish, etc….
   17. Wipe tub with a tack cloth. Don’t press hard.
   18. Wipe tub with 2 light coats (6 oz of Glow Check 3 oz per pass)
   19. Let glo ck dry 10-min minimum.
   20. Mix resin according to label.
   21. Spray a light coat (tack coat) on the tub. Use a tack cloth between each coat. Allow to dry for 3-min.
   22. second coat allow to dry 3-min.
   23. Spray third coat.
   24. A fourth and fifth coat may be applied as needed.
   25. Tear down paper using an upward motion.
   26. Replace caulking.
   27. Clean up.

TRY our 100% Waterbased primer and clear coat system for use with MULTISPEC
NO NASTY SOLVENT ODORS FAST DRY AND SUPER DURABLE CLEARCOAT.

Multispec countertop refinishing is one of the fastest-growing services in refinishing. A complete kitchen and have a facelift in less than 24 hours for a fraction of the price of the cost of replacement. This versatile product can also be applied to bathroom tiles and floors. here at Cogent Coatings we offer over 40 colors to the experienced refinisher

Want to learn how to apply this awesome product?

Call us here at cogent Coatings and we can teach you how to make money refinishing countertops and bathroom tile 862-238-7224